Introduction
About every 2 years Debian introduces a new release.
At the time I'm writing this Debian Bullseye has been out as stable for over a month.
The following notes shall provide the order in which FancyLibs shall be adapted and released for a new Debian release and are based on Adapting FancyLibs & MinGW-Pkg from Debian 9 Stretch to 10 Buster, Mingw-7 to Mingw-8.
THIS IS WORK IN PROGRESS.
Adapting FancyLibs to new Debian Release
The steps per sub project are the same as described for "HelloWorld projects* in Adapting PBA to new Debian Release, with -o unix
(before MinGW adaption) or -o "arch|unix|9"
after MinGW adaption.
FancyLibs subproject rebuild order phase 1
The recommended order for phase 1 (before MinGW adaptions) is:
Project (subdir) | Archs (-o parameter) | Remarks general | Status & Remarks stretch/buster | Release with Bullseye |
---|---|---|---|---|
fancylog | arch|8 | 1.0.3-9 | ||
cute-headers | arch|8 | Data only, could be done anytime | 1.6.1-12 | |
fancylibs | arch | Added libstdc++-10-dev as build dependency variant | 3.7.4-11 | |
fancydb | - | Unix only | TBD | TBD Was: 0.6.5-7 |
fancydrawing | arch | TBD | TBD Was: 0.6.2-3 | |
fancygpsdclient | unix | TBD | TBD Was: 0.4.3-5 | |
fancyhttpd | arch | TBD | TBD Was: 0.8.0-2 | |
fancylogd | unix | TBD | TBD Was: 0.1.0-3 | |
fancylogview | . | Debian unix & amd64 only | TBD Was: Half OK: Does not build for armhf, maybe never did, libqt4-dev seems incomplete for arm | TBD Was: 0.3.0.5 |
fancypkcs11 | unix | Debian unix & amd64 only | TBD Was: Half OK: Does not build for armhf, maybe never did | TBD Was: 0.4.1-1 |
fancypcsc | unix | Debian unix & amd64 only | TBD Was: Half OK: Does not build for armhf, maybe never did | TBD Was: 0.2.5-2 |
fancymodbus | unix | TBD Was: Required minor adaption, with libmodbus-dev going from 3.0.6 to 3.1.4 | TBD Was: 0.2.4-3 | |
fancysax | arch | TBD | TBD Was: 0.6.1-7 | |
fancyqt4 | arch | TBD | TBD Was: 0.9.3-3 | |
fancyqt4widgets | arch | TBD | TBD Was: 0.5.2-2 | |
fancysane | unix | TBD Was: but libsane-dbg not available for buster. Reduced that to suggestion | TBD Was: 0.3.2-5 | |
fancyqmi | unix | Debian unix & amd64 only | TBD Was: Half OK: Does not build for armhf, maybe never did | TBD Was: 0.2.1-5 |
fancyssl-tools | unix | TBD | TBD Was: 0.4.0-5 |
Tests with released Bullseye on 2021-10-01 to ... showed that ... (TBD) all unix builds work for amd64, most work for armhf.
MinGW-Pkg rebuilds
Buster came with Mingw 8, so does Bullseye. Mingw-W64 9.0.0 was released 2021-05-22 which was too late for Bullseye. So there should'nt be much to adapt.
Order based on mingw 6 rebuild order
Project (mingw-pkg subdir pattern) | Dep. | Version in mingw-pkg MinGW-8 Buster | Version in mingw-pkg MinGW-8 Bullseye | Bullseye Status |
---|---|---|---|---|
(osslsigncode) | - | - | - | ignored |
mingw-w64-binutils / binutils-mingw-w64 | - (2.31.1-11+8.3) | TBD Was: - (2.31.1-11+8.3) | provided by Debian now | |
(mingw-w64-libmysql) | - (6.1.11-1clazzespba2) | TBD Was: - (6.1.11-1clazzespba2) | obsolete since mingw-6, empty now | |
mingw-w64-libmariadb | - | - | not required for now | |
mingw-w64-gcc-rt | 8.3.0 (-6+21.3~deb10u1), uses Debian's g++-mingw64-* | TBD Was: 8.3.0 (-6+21.3~deb10u1), uses Debian's g++-mingw64-* | TBD Was: OK | |
mingw-w64-zlib | mingw-w64-gcc-rt | 1.2.11 | TBD Was: 1.2.11 | TBD Was: OK after rules changes: common-build-indep to build-indep, common-install-indep to install-indep |
mingw-w64-openssl | mingw-w64-zlib | 1.1.1c | TBD Was: 1.1.1c | TBD Was: OK |
mingw-w64-libpng | mingw-w64-zlib | 1.6.37 | TBD Was: 1.6.37 | TBD Was: OK? libtool: link: x86_64-w64-mingw32-gcc -O2 -Wall -o .libs/pngfix.exe contrib/tools/pngfix.o ./.libs/libpng16.dll.a -lz -L/usr/x86_64-w64-mingw32/lib libtool: error: Could not determine the host path corresponding to libtool: error: '.../mingw-pkg/trunk/mingw-w64-deb/mingw-w64-libpng-1.6.37/build/.libs' libtool: error: Continuing, but uninstalled executables may not work. ... |
mingw-w64-libjpeg | mingw-w64-libpng | 9c | TBD Was: 9c | TBD Was: OK |
mingw-w64-libtiff | mingw-w64-libjpeg | 4.0.10 | TBD Was: 4.0.10 | TBD Was: OK |
mingw-w64-libmng | mingw-w64-libjpeg | 2.0.3-3 | TBD Was: 2.0.3-3 | TBD Was: OK |
mingw-w64-bzip2 | mingw-w64-gcc-rt | 1.0.6-4 | TBD Was: 1.0.6-4 | TBD Was: OK |
mingw-w64-libboost | mingw-w64-bzip2 | - | - | - (ignored) |
mingw-w64-libiconv | mingw-w64-gcc-rt | 1.16-1 | TBD Was: 1.16-1 | TBD Was: OK |
mingw-w64-libxml2 | mingw-w64-libiconv | 2.9.9-1 | TBD Was: 2.9.9-1 | TBD Was: OK |
mingw-w64-gettext | mingw-w64-libxml2 | 0.20.1-1 | TBD Was: 0.20.1-1 | TBD |
mingw-w64-qt4-qmake | 4.8.7-1clazzespba0 | TBD Was: 4.8.7-1clazzespba0 | TBD | |
mingw-w64-qt4 | mingw-w64-qt4-qmake, many of above | 4.8.7-1clazzespba0 | TBD Was: 4.8.7-1clazzespba0 | TBD Needed these: |
mingw-w32-qt4-qmake | 4.8.7-1clazzespba0 | TBD Was: 4.8.7-1clazzespba0 | TBD Was: Builldep change: libstdc++-6-dev to libstdc++-6-dev OK | |
mingw-w32-qt4 | mingw-w32-qt4-qmake, many of above | 4.8.7-1clazzespba0 | TBD Was: 4.8.7-1clazzespba0 | TBD Was: TODO Building without SSL support since mingw-7. |
mingw-w64-jni-headers | 1.6.0-4clazzespba6 | TBD Was: 1.6.0-4clazzespba6 | TBD Was: OK. Using headers from OpenJDK-11 now. Should we raise the version to 11? |
FancyLibs subproject rebuild order phase 3
The recommended order for phase 2 (before MinGW adaptions) is:
Project (subdir) | Archs (-o parameter) | Bullseye Status | Version with MinGW-8 package for Bullseye | Remarks, changes |
---|---|---|---|---|
fancylog | - (arch|8) | TBD | TBD Was: 1.0.3-7 | |
cute-headers | - (arch|8) | TBD | TBD Was: 8_1.6.1-10 | |
fancylibs | - (arch|8) | TBD Was: OK | TBD Was: 3.7.3-2 | TBD |
fancydrawing | - (arch|8) | TBD Was: OK | TBD Was: 0.6.2-5 | TBD Was: In debian-mingw-8/rules: # see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=930492 w32pcdir = /usr/i686-w64-mingw32/lib/pkgconfig w64pcdir = /usr/x86_64-w64-mingw32/lib/pkgconfig ... common-build-indep:: cd $(builddir) && PKG_CONFIG_LIBDIR=$(w64pcdir) $(MAKE) arch=$(arch) cd $(builddir32) && PKG_CONFIG_LIBDIR=$(w32pcdir) $(MAKE) arch=$(arch32) |
fancygpsdclient | - (unix|8) | TBD Was: OK | TBD Was: 0.4.3-7 | TBD Was: debian-mingw-8/rules adapted like above |
fancyhttpd | - (arch|8) | TBD Was: OK | TBD Was: 0.8.0-3 | TBD |
fancylogd | - (unix|8) | TBD Was: OK | TBD Was: 0.1.0-6 | TBD |
fancylogview | - (nsis directory) | TBD Was: OK | TBD Was: 0.3.0.6 | TBD Was: Deferred, depends on QT |
- (unix only) | - | - | Probably never build for MinGW, despite debian-mingw-?/ directories | |
fancypcsc | - (arch|8) | TBD Was: OK | TBD Was: 0.2.5-4 | |
- (unix only) | - | - | ||
fancysax | - (arch|8) | TBD Was: OK | TBD Was: 0.6.1-9 | |
fancyqt4 | - (arch|8) | TBD Was: OK | TBD Was: 0.9.3-5 | |
fancyqt4widgets | - (arch|8) | TBD Was: OK | TBD Was: 0.5.2-3 | |
- (unix only) | - | - | ||
- (unix only) | - | - | ||
fancyssl-tools | - (arch|8) | TBD Was: OK | TBD Was: 0.4.0-6 |
Obsolete subdirs
Project (subdir) | Remarks |
---|---|
base64 | never even built for stretch |
gpsfake-runner | shell scripts only |
jnix | never even built for stretch |
fancyxmlsock | Looks lke old experimental code now in fancysock |